xylanh khí nén 2 đầu cần Aritac

xylanh khí nén 2 đầu cần Aritac

  • Xuất xứ : AIRTAC - TAIWAN
  • Tình Trạng : Có Sẵn
  • Giá SP : Liên Hệ

Thông số kỹ thuật

Mô tả xylanh khí nén hai đầu cần Airtac 

xylanh khí nén hai đầu cần Airtac SCD32 SCD40 SCD50 SCD63 SCD80 SCD100 | xylanh điều chỉnh hành trình SCJ32 | SCJ40 | SCJ50 | SCJ63 | SCJ80 | SCJ100

  • Standard cylinder manufactured by our enterprise.
  • The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of oil reservation.
  •  It is no tie rod cylinder. The cylinder barrel is “Mickey Mouse”  shape ,and have good corrosion.
  • Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
  • The buffer adjustment of cylinder is smooth and steady.
  • Mounting accessories are the same as SC series.
  • The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.

Thông số kỹ thuật xylanh khí nén Airtac:
xylanh khí Airtac | xylanh hai đầu cần SCD32 SCD40 SCD50 SCD63 SCD80 SCD100 | xylanh điều chỉnh hành trình SCJ32 | SCJ40 | SCJ50 | SCJ63 | SCJ80 | SCJ100

Hướng dẫn sử dụng xylanh khí nén Aritac:

  •   When load changes in the work, the cylinder with abundant output capacity shall be ed.
  • Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
  • Necessary protection meaSCre shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
  • Dirty SCbstances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
  • The medium used by cylinder shall be filtered to 40μm or below.
  • Anti-freezing meaSCre shall be adopted under low temperature environment to prevent moisture freezing.
  • The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
  • The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
  •  If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  SCrface. Anti-dust caps shall be added in air inlet and outlet ports.

Hướng dẫn Order xylanh khí nén

xylanh khí Airtac | xylanh hai đầu cần SCD32 SCD40 SCD50 SCD63 SCD80 SCD100 | xylanh điều chỉnh hành trình SCJ32 | SCJ40 | SCJ50 | SCJ63 | SCJ80 | SCJ100

  • xylanh khí nén hai đầu cần  SCD32 SCD40 SCD50 SCD63 SCD80 SCD100
  • xylanh khí nén hai đầu cần điều chỉnh hành trình SCJ32 SCJ40 SCJ50 SCJ63 SCJ80 SCJ100