Xilanh khí nén SC100 Series

Xilanh khí nén SC100 Series

  • Xuất xứ : AIRTAC-ĐÀI LOAN
  • Tình Trạng : Có sẵn
  • Giá SP : Liên hệ

Thông số kỹ thuật

Mô tả xilanh khí nén SC100 Series

  • Standard cylinder manufactured by our enterprise.
  • The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
  • It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
  • Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
  • The buffer adjustment of cylinder is smooth and steady.
  • Cylinders and mounting accessories with several specifications are optional.
  • The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃.

Thông số kỹ thuật xilanh khí nén SC100 Airtac:
xylanh khí nén Airtac SC32 SC40 SC50 SC63 SC80 SC100 | xylanh hai đầu cần SCD32 SCD40 SCD50 SCD63 SCD80 SCD100 | xylanh điều chỉnh hành trình SCJ32|40|50|63

Hướng dẫn sử dụng xilanh khí nén SC100 series:

  •   When load changes in the work, the cylinder with abundant output capacity shall be ed.
  • Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
  • Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
  • Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
  • The medium used by cylinder shall be filtered to 40μm or below.
  • Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
  • The cylinder shall be carried out test run without load before application. Prior to run

    , buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.

  • The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
  •  If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the  surface. Anti-dust caps shall be added in air inlet and outlet ports.

Hướng dẫn Order: 

xylanh khí nén Airtac SC32 SC40 SC50 SC63 SC80 SC100 | xylanh hai đầu cần SCD32 SCD40 SCD50 SCD63 SCD80 SCD100 | xylanh điều chỉnh hành trình SCJ32|40|50|63

  • xylanh khí nén Airtac SC32 SC40 SC50 SC63 SC80 SC100
  • xylanh hai đầu cần  SCD32 SCD40 SCD50 SCD63 SCD80 SCD100
  • xylanh điều chỉnh hành trình SCJ32 SCJ40 SCJ50 SCJ63
  • SC100x400, SC100x450, SC100x500, SC100x600, SC100x700, SC100x800, SC100x900, SC100x1000,
  • SC125x25, SC125x50, SC125x75, SC125x80, SC125x100, SC125x125, SC125x150, SC125x160, SC125x175, SC125x200, SC125x250, SC125x300, SC125x350, SC125x400, SC125x450, SC125x500, SC125x600, SC125x700, SC125x800, SC125x900, SC125x1000,
  • SC160x25, SC160x50, SC160x75, SC160x80, SC160x100, SC160x125, SC160x150, SC160x160, SC160x175, SC160x200, SC160x250, SC160x300, SC160x350, SC160x400, SC160x450, SC160x500, SC160x600, SC160x700, SC160x800, SC160x900, SC160x1000,
  • SC200x25, SC200x50, SC200x75, SC200x80, SC200x100, SC200x125, SC200x150, SC200x160, SC200x175, SC200x200,
  • SC32x25, SC32x50, SC32x75, SC32x80, SC32x100, SC32x125, SC32x150, SC32x160, SC32x175, SC32x200, SC32x250, SC32x300, SC32x350, SC32x400, SC32x450, SC32x500, SC32x600, SC32x700, SC32x800, SC32x900, SC32x1000,SC32x125, SC32x150, SC32x160, SC32x175, SC32x200, SC32x250, SC32x300, SC32x350, SC32x400, SC32x450, SC32x500, SC32x600, SC32x700, SC32x800, SC32x900, SC32x1000,
  • SC40x25, SC40x50, SC40x75, SC40x80, SC40x100, SC40x125, SC40x150, SC40x160, SC40x175, SC40x200, SC40x250, SC40x300, SC40x350, SC40x400, SC40x450, SC40x500, SC40x600, SC40x700, SC40x800, SC40x900, SC40x1000, SC50x25, SC50x50, SC50x75, SC50x80, SC50x100, SC50x125, SC50x150, SC50x160, SC50x175, SC50x200, SC32x25, SC32x50, SC32x75, SC32x80, SC32x100,  SC40x25, SC40x50, SC40x75, SC40x80, SC40x100, SC40x125, SC40x150, SC40x160, SC40x175, SC40x200, SC40x250, SC40x300, SC40x350, SC40x400, SC40x450, SC40x500, SC40x600, SC40x700, SC40x800, SC40x900, SC40x1000, SC50x25, SC50x50, SC50x75, SC50x80, SC50x100, SC50x125, SC50x150, SC50x160, SC50x175, SC50x200, SC50x250, SC50x300, SC50x350, SC50x400, SC50x450, SC50x500, SC50x600, SC50x700, SC50x800, SC50x900, SC50x1000, SC63x25, SC63x50, SC63x75, SC63x80, SC63x100, SC63x125, SC63x150, SC63x160, SC63x175, SC63x200, SC63x250, SC63x300, SC63x350, SC63x400, SC63x450, SC63x500, SC63x600, SC63x700, SC63x800, SC63x900, SC63x1000, SC80x25, SC80x50, SC80x75, SC80x80, SC80x100, SC80x125, SC80x150, SC80x160, SC80x175, SC80x200, SC50x250, SC50x300, SC50x350, SC50x400, SC50x450, SC50x500, SC50x600, SC50x700, SC50x800, SC50x900, SC50x1000, SC63x25, SC63x50, SC63x75, SC63x80, SC63x100, SC63x125, SC63x150, SC63x160, SC63x175, SC63x200, SC63x250, SC63x300, SC63x350, SC63x400, SC63x450, SC63x500, SC63x600, SC63x700, SC63x800, SC63x900, SC63x1000, SC80x25, SC80x50, SC80x75, SC80x80, SC80x100, SC80x125, SC80x150, SC80x160, SC80x175, SC80x200, SC80x250, SC80x300, SC80x350, SC80x400, SC80x450, SC80x500, SC80x600, SC80x700, SC80x800, SC80x900, SC80x1000, SC100x25, SC100x50, SC100x75, SC100x80, SC100x100, SC100x125, SC100x150, SC100x160, SC100x175, SC100x200, SC100x250, SC100x300, SC100x350, SC100x400, SC100x450, SC100x500, SC100x600, SC100x700, SC100x800, SC100x900, SC100x1000, SC125x25, SC125x50, SC125x75, SC125x80, SC125x100, SC125x125, SC125x150, SC125x160, SC125x175, SC125x200, SC125x250, SC125x300, SC125x350, SC125x400, SC125x450, SC125x500, SC80x250, SC80x300, SC80x350, SC80x400, SC80x450, SC80x500, SC80x600, SC80x700, SC80x800, SC80x900, SC80x1000, SC100x25, SC100x50, SC100x75, SC100x80, SC100x100, SC100x125, SC100x150, SC100x160, SC100x175, SC100x200, SC100x250, SC100x300, SC100x350