xylanh ba trục TCM series

xylanh ba trục TCM series

  • Xuất xứ : TAIWAN
  • Tình Trạng : CÒN HÀNG
  • Giá SP : LIÊN HỆ

Thông số kỹ thuật

Mô tả sản phẩm xylanh ba trục Airtac model: TCM series

xylanh ba trục Airtac TCM10-20 , TCM 12-15 , TCM 20-50 , TCM 25-75 , TCM 32-100 , xylanh khí nén TCM 40-50 , TCM 50-50 , TCM 63-50 , TCM 80-75 , TCM 100-75 , TCM 10-20 , TCM 12-40, TCM 20-30, TCM 25-50, TCM 32-80, TCM 40-40

  1.  JIS standard is implemented.
  2.  Two guides of special bearing steel and linear bearing or bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.
    ★Note: Steel ball linear bearing: It is suitable for elevation action of cylinder or the situation requiring high precision and high bearing ability, especially for the situation requiring low fraction action process.
     Bronze sliding bearing: it is suitable for the action that has radial load resistance. Compared with normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity.
  3. Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install.
  4. The bottom, back side and fixing plate of main body respectively has two exact orientation orifices (See ΦPA orifice and the orifice in XX point), which can provide orientation installation with high precision for the special situation.
  5.  Options of switch mounting with provision 4 mounting slots.
  6. Special design of main body provides multi-mount

Thông số sản phẩm xylanh ba trục Airtac model: TCM series:

xylanh ba trục Airtac TCM | 10-20 | 12-15 | 20-50 | 25-75 | 32-100 | 40-50 | 50-50 | 63-50 | 80-75 | 100-75 | 10-20 | 12-40| 20-30| 25-50| 32-80| 40-40

Hướng dẫn chọn mã sản phẩm xylanh khí nén Airtac model: TCM & TCL series

xylanh ba trục Airtac TCM | 10-20 | 12-15 | 20-50 | 25-75 | 32-100 | 40-50 | 50-50 | 63-50 | 80-75 | 100-75 | 10-20 | 12-40| 20-30| 25-50| 32-80| 40-40